![]() |
|
| Register | FAQ | PM | News | Events | Groups | Blogs | Calendar | Mark Forums Read |
![]() |
|
Unregistered
|
||||||
| Synergy Electric Models Synergy Electric Models Support |
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 |
|
Registered Users
Join Date: Sep 2006
Location: San Diego, CA
|
Ok, packs are the last thing I need to order for my E7, what kind of
pack weight are you guys running? I'll be running the Xera 5325-500 Thanks. Jake |
|
|
|
|
|
#2 |
|
Registered Users
|
There are a couple discussions about batteries, but I run two different types. I have a couple sets of the Hyperion vx g3 4200mah 6s and a Voltz 12s 3700mAh stock pack. I know many run bigger 5000mah packs but the weight is noticed.
Sent from my iPhone using Tapatalk
__________________
Team Synergy/Team Scorpion |
|
|
|
|
|
#3 |
|
Registered Users
Thread Starter
Join Date: Sep 2006
Location: San Diego, CA
|
I am running 12s 4K packs in my Logo 600se, and so I was thinking about the same for the E7, but I was thinking that the motor would be hard on them, so maybe I should go with 5K packs.
|
|
|
|
|
|
#4 |
|
Registered Users
|
I'm not familiar with that particular Xera motor. Is it one of their 10K watt motors?
__________________
2 - Synergy E7, Vbar 5 Pro, BLS255 & 256HV, Hacker Turnado 530 Edition/Quantum 4530-500, Rail 696/716, CC120/160HV, WR Sup BEC, Scorp BUG | Trex 500 ESP, ICE 75, Hacker 1600KV, 5245MG & 9254, BeastX, i² head/swash | Futaba 18mz |
|
|
|
|
|
#5 |
|
Registered Users
Thread Starter
Join Date: Sep 2006
Location: San Diego, CA
|
Sorry, typo on the motor. It's the Xera 4530-500kv
|
|
|
|
|
|
#6 |
|
Registered Users
|
That motor is capable of pulling 10,000 watts. If I were using that motor I'd want good quality 4500 to 5000 65C as a minimum.
__________________
2 - Synergy E7, Vbar 5 Pro, BLS255 & 256HV, Hacker Turnado 530 Edition/Quantum 4530-500, Rail 696/716, CC120/160HV, WR Sup BEC, Scorp BUG | Trex 500 ESP, ICE 75, Hacker 1600KV, 5245MG & 9254, BeastX, i² head/swash | Futaba 18mz |
|
|
|
|
|
#7 |
|
Registered Users
Thread Starter
Join Date: Sep 2006
Location: San Diego, CA
|
|
|
|
|
|
|
#8 |
|
|
I'm running a Xera 4530-500 (Black Mamba) in my E7. I have tried different packs in the past but I'm currently flying TP 6s 4400 65c, these feel much better than 5000s and I did not really loose any flight time. I get just over 4 minutes with this setup at just over 2150RPM and 13-14 degrees of pitch. My flying style is smack 3d and big air fast (power hungry
![]() Rob |
|
|
|
![]() |
|
Unregistered
|
||||||
| Synergy Electric Models Synergy Electric Models Support |
| Thread Tools | |
| Display Modes | |
|
|