SOLD - Rave 450 FBL, Total-G, ICE 50, 3S, 6S, extras - REDUCED

rablett · 02-06-2012, 10:14 AM

SOLD - Rave 3D that I built this summer. It has a total of 22 carefully logged flights, sport aerobatic flown only. Never crashed or abused in any way. Never even a hard landing. I have been building and flying rc helis for 30 years. I simply need to make room for a new project so something has to go.

Includes as seen in photos:

Rave 3D with FBL head & frame stiffeners
Scorpion 2221-2010 motor installed. This motor has 10 flights on it.
CC ICE 50 ESC, brand new when installed in this heli
3 x Hitec HS-5065MG servos, brand new when installed in this heli
Futaba S9257 on rudder, brand new when installed in this heli
Radix 350mm FBL blades, KBDD tail blades and original tail blades.
Black tail gear drive set, never installed.

Total-G with all accessories. This was used in this heli for the first 12 flights.
(I tested another FBL unit in it for the last 10 flights which has been removed)
(There is a tiny crack in the case, which I tried to capture in the photo. I did this plugging in a servo
before I ever used it. Just cosmetic, but wanted to point it out anyway)
2 x Spektrum DSM2 satellites with cables

2 canopies. The original canopy has new holes which made room for the bigger 6S battery. The original holes are covered by the scorpion stickers. The Canomod canopy has never been used.

The rudder servo was moved to an aluminum boom mount when the heli was 6S to help with balance. I am also included the original servo mount and pushrod to put the servo back to the frame mount if desired.

A Next-D / Scorpion 4400kV motor (for 3S) which has the original 12 flights on it.

This helicopter is a monster, especially on 6S. I just need to focus on bigger helicopters as my eyes aren't getting any younger.

rablett · 02-06-2012, 09:31 PM

Price reduced

inner3 · 02-07-2012, 01:15 AM

What has the price been reduced to? please Pm

Terkan · 02-07-2012, 09:28 AM

Sent reply in other forum. I'll take it, send your PP address.

Thanks
Dan

Terkan · 02-07-2012, 10:31 AM

Paypal sent.

Thanks!
Dan

rablett · 02-07-2012, 10:46 AM

SOLD!

Thanks Dan.

DesJardins · 02-07-2012, 11:46 AM

That's one very nice Rave!

02-06-2012, 10:14 AM	#1
rablett Registered Users Join Date: Jul 2006 Location: Northern Michigan	SOLD - Rave 450 FBL, Total-G, ICE 50, 3S, 6S, extras - REDUCED SOLD - Rave 3D that I built this summer. It has a total of 22 carefully logged flights, sport aerobatic flown only. Never crashed or abused in any way. Never even a hard landing. I have been building and flying rc helis for 30 years. I simply need to make room for a new project so something has to go. Includes as seen in photos: Rave 3D with FBL head & frame stiffeners Scorpion 2221-2010 motor installed. This motor has 10 flights on it. CC ICE 50 ESC, brand new when installed in this heli 3 x Hitec HS-5065MG servos, brand new when installed in this heli Futaba S9257 on rudder, brand new when installed in this heli Radix 350mm FBL blades, KBDD tail blades and original tail blades. Black tail gear drive set, never installed. Total-G with all accessories. This was used in this heli for the first 12 flights. (I tested another FBL unit in it for the last 10 flights which has been removed) (There is a tiny crack in the case, which I tried to capture in the photo. I did this plugging in a servo before I ever used it. Just cosmetic, but wanted to point it out anyway) 2 x Spektrum DSM2 satellites with cables 2 canopies. The original canopy has new holes which made room for the bigger 6S battery. The original holes are covered by the scorpion stickers. The Canomod canopy has never been used. The rudder servo was moved to an aluminum boom mount when the heli was 6S to help with balance. I am also included the original servo mount and pushrod to put the servo back to the frame mount if desired. A Next-D / Scorpion 4400kV motor (for 3S) which has the original 12 flights on it. This helicopter is a monster, especially on 6S. I just need to focus on bigger helicopters as my eyes aren't getting any younger. Attached Thumbnails __________________ Goblin 700, 630, Protos Stretch, JR E6-550 Last edited by rablett; 02-07-2012 at 10:47 AM..

02-06-2012, 09:31 PM	#2
rablett Registered Users Thread Starter Join Date: Jul 2006 Location: Northern Michigan	Price reduced __________________ Goblin 700, 630, Protos Stretch, JR E6-550

02-07-2012, 10:46 AM	#6
rablett Registered Users Thread Starter Join Date: Jul 2006 Location: Northern Michigan	SOLD! Thanks Dan. __________________ Goblin 700, 630, Protos Stretch, JR E6-550

02-07-2012, 11:46 AM	#7
DesJardins Registered Users Join Date: Jan 2011 Location: Arizona	That's one very nice Rave! __________________ TBS Discovery FPV Quad (DJI Naza & GPS) T-motors (MT-2216-11) 900Kv, Graupner 9" Props Futaba 8FGs & (S.bus) R6208SB PowerLab6 & Pulse "3S" 45C Lipos

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-07-2012, 01:15 AM	#3
inner3 Registered Users Join Date: Dec 2010 Location: Alabama	What has the price been reduced to? please Pm

02-07-2012, 09:28 AM	#4
Terkan Registered Users Join Date: Aug 2004 Location: Ohio	Sent reply in other forum. I'll take it, send your PP address. Thanks Dan

02-07-2012, 10:31 AM	#5
Terkan Registered Users Join Date: Aug 2004 Location: Ohio	Paypal sent. Thanks! Dan