DX5e Trim Centering?

PlaneTech8 · 02-08-2012, 08:24 AM

I have played with my trim settings on my DX5e...

Wondering if they re-set (center) each time the TX is shut off?

Thanks

aerocal · 02-08-2012, 11:46 AM

No.It should retain the trim settings during/after a powercycle.If your not sure where center is listen carefully as you run them back and forth.It will make a slightly different tone when it hits center.

PlaneTech8 · 02-08-2012, 01:17 PM

Thanks for the info... I searched through the manual and nothing about "center".

I'll have to try that out and find center. Thanks

02-08-2012, 08:24 AM	#1
PlaneTech8 Registered Users Join Date: Jan 2012 Location: Iowa	DX5e Trim Centering? I have played with my trim settings on my DX5e... Wondering if they re-set (center) each time the TX is shut off? Thanks __________________ BLADE MSR X Spektrum DX5e

02-08-2012, 11:46 AM	#2
aerocal Registered Users Join Date: Jun 2008 Location: Central California	No.It should retain the trim settings during/after a powercycle.If your not sure where center is listen carefully as you run them back and forth.It will make a slightly different tone when it hits center. __________________ Too many helis & Too many planks Lots of DX radios & A couple Futaba radios AMA member & Full scale plank driver HELIFREAK !!! To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

02-08-2012, 01:17 PM	#3
PlaneTech8 Registered Users Thread Starter Join Date: Jan 2012 Location: Iowa	Thanks for the info... I searched through the manual and nothing about "center". I'll have to try that out and find center. Thanks __________________ BLADE MSR X Spektrum DX5e

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode