Fun, Learning, Friendship and Mutual Respect
START  HERE


Unregistered
Go Back   HeliFreak > R/C Electronics Support > Align 3G FBL System > Align 3GX FBL System


Align 3GX FBL System Align 3GX FBL Flybarless System Software and Hardware Support


Reply
 
Thread Tools Display Modes
Old 02-27-2012, 03:33 PM   #1
Dan E
Registered Users
 

Join Date: Mar 2011
Location: Australia
Default Buddyboxing with 3gx

We attempted this the other day with disastrous results!
The 3gx has been set up with my dx7 but I used a friend's JR dsx9 as the master.
He copied my settings straight across and gave it a quick test on the bench. It all seemed to work fine. I set a model in my transmitter to 1 servo 90 degrees (as you would in the sim) and when he switched control to me there was a slight jump in pitch but I was able to control the model correctly.

We've buddyboxed other models without a problem so we know that part works.

When we went to fly every time he switched control to me the model would go to full negative! Very scary, lucky he was quick on the draw and grabbed it back off me in time to save it. We didn't have enough time to have another go at setting it up so we left it at that.

Like I said, on the bench it seemed fine but was there some step we missed?
Dan E is offline        Reply With Quote
Reply




Unregistered
Go Back   HeliFreak > R/C Electronics Support > Align 3G FBL System > Align 3GX FBL System


Align 3GX FBL System Align 3GX FBL Flybarless System Software and Hardware Support

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Copyright © 2004-2011 - William James - Helifreak.com