Gryphon GVR-7020 Question

wimbledon99 · 02-27-2012, 04:54 PM

Hi,

Does anyone know if an ElyQ switch can be used with a Gryphon regulator?

Thanks

Fabien · 06-14-2012, 05:28 PM

Hi,

it's a bit late answer, but any fail safe switch can work, at the condition that it has no specific equipment onboard ( the gryphon switches have an integrated led), and must be wired correctly.

By asking anybody who has a gryphon swtich to check with an ohm meter what are the open / close pins positions, you can even wire a standard on / off switch ( off will be on ..)

BEst regards,

Fabien

02-27-2012, 04:54 PM	#1
wimbledon99 Registered Users Join Date: Oct 2008 Location: West Sussex, UK	Gryphon GVR-7020 Question Hi, Does anyone know if an ElyQ switch can be used with a Gryphon regulator? Thanks __________________ 2 x 700 - BeastX / OS 91 HZ Velo 50 - BeastX / YS 56 SR 600 Hughes 500E - BeastX 500 ESP - BeastX

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-14-2012, 05:28 PM	#2
Fabien Registered Users Join Date: Feb 2006 Location: France	Hi, it's a bit late answer, but any fail safe switch can work, at the condition that it has no specific equipment onboard ( the gryphon switches have an integrated led), and must be wired correctly. By asking anybody who has a gryphon swtich to check with an ohm meter what are the open / close pins positions, you can even wire a standard on / off switch ( off will be on ..) BEst regards, Fabien