3GX Help

rrmc_yaa · 04-17-2012, 01:20 PM

I cannot nor can i find someone who knows how to adjust the head speed in the 3gx. i have calibrated it and it acknowledges its there. it says when using a satalite which i am to use chanel 5. no clue

satgod · 04-17-2012, 02:01 PM

I would use the gov in me esc to set headspeed

rrmc_yaa · 04-18-2012, 08:20 AM

So after much reseach I have found the solution. the 3GX governer must be set to the Gear channel. that is the channel five the manual was talking about. once i set it to the gear channel boom it worked properly.

04-17-2012, 01:20 PM	#1
rrmc_yaa Registered Users Join Date: Apr 2012 Location: USA, Alabama, Hazel Green	3GX Help I cannot nor can i find someone who knows how to adjust the head speed in the 3gx. i have calibrated it and it acknowledges its there. it says when using a satalite which i am to use chanel 5. no clue

04-17-2012, 02:01 PM	#2
satgod Registered Users My HF Map location Join Date: Apr 2011 Location: USA,KY,Rineyville	I would use the gov in me esc to set headspeed __________________ Trex 600EFL Pro V2 V-Bar ds610 ds650 cc pro bec Scorpion 130a HV KDE 600XF-530 450pro 1860kv(6s) cc50 (4 DS215MG) 10t pinion, Tarot DFC, Ikon TBS Discovery (Quad), naza-gps, 900mhz fpv, gopro2, ET OSD pro, D/L UHF X-8 Wing , D/L UHF Full fpv package

04-18-2012, 08:20 AM	#3
rrmc_yaa Registered Users Thread Starter Join Date: Apr 2012 Location: USA, Alabama, Hazel Green	fixed it So after much reseach I have found the solution. the 3GX governer must be set to the Gear channel. that is the channel five the manual was talking about. once i set it to the gear channel boom it worked properly.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode