Good bye Logo 400 SE

[rdlohr]

Originally Posted by Bullfrog98

Im thinking bad sensor on this one. I had a bad sensor on my first full size V-bar.

It was a real PITA as the heli just kept doing weird things, 90 ~ 180 degree tail kicks were not uncommon and some days the cyclic movement was so erratic I couldn't get the heli to fly straight.

All of this happened while I was still learning to fly helis so the guys at the field and myself dismissed a lot of the weirdness as me making stupid mistakes. It knocked my confidence really badly.

In desperation I tried a (then new on the market) blueline sensor and the change was like night to day, suddenly I could fly again.

Good input, thanks!

Looks like I have a couple paths to follow.

Rick

[el guapo]

Originally Posted by rdlohr

What are you saying?

a) Vibes are to high?
b) Sensor is bad?
c) Other?

I'm telling you this error from your log is not normal. I'd recommend asking readyheli, vbar forum, Mr Mel and Vstabi forum to get information about this error.

"4:33 Tail Sensor shows no actual Signal"

"This is an plausibility check. If the Heli starts to vibrate, this shall at least have effect to all sensors. If one of the Sensors do not show the Signal, it may point to a specific problem, not necassary with this sensor, but a general problem."

[rdlohr]

Originally Posted by el guapo

I'm telling you this error from your log is not normal. I'd recommend asking readyheli, vbar forum, Mr Mel and Vstabi forum to get information about this error.

"4:33 Tail Sensor shows no actual Signal"

"This is an plausibility check. If the Heli starts to vibrate, this shall at least have effect to all sensors. If one of the Sensors do not show the Signal, it may point to a specific problem, not necassary with this sensor, but a general problem."

Oh, OK , thanks. I already posted it in the VBAR forum and am patiently waiting for Mr. Mel to swoop down and impart his knowledge. LOL.

Rick