Setting up 450 Pro V2 with DX6i Help

rhattan503 · 05-08-2012, 07:34 PM

I currently have an Align Trex 450 Pro V2 (3GX), Spektrum DX6i transmitter and Spektrum AR6200 receiver. This is my first heli and Helifreak has been very useful. I am having difficulty finding the exact wiring needed to bind my Spektrum DX6i to Spektrum AR6200 receiver (See pictures). I have tried using the binding plug in BATT/BIND pins on receiver and have power running through AUX 1 pins. Receiver and satellite attachment continue to blink even when transmitter indicates it's in bind mode.

I have tried numerous searches here but haven't found enough information along with wiring to include 3GX. Can anyone help a n00b?

RMJ22 · 05-10-2012, 10:09 PM

Does anybody know of a thread or video to help with initial set-up for this

?

Full Montee · 05-10-2012, 10:17 PM

OP search my name for posts on this. Its been a few months and the 3GX may have been updated, but you have the gear needed for how I've done it in the past. If my other posts don't help reply here or PM me.

RMJ22 · 05-16-2012, 10:34 PM

Montee, thanks for the help, I'm trying to search your posts, but dont' know how to do an OP search? Can you point me to some sort of wiring diagram that shows what plugs where? And then how to set up the radio?

Other issues: here to plug the ESC power. Also, simple as it sounds, the Tx and Rx won't bind. . .

Full Montee · 05-17-2012, 12:01 AM

What I was trying to say is Original Poster, you, do a search for me.
What you're experiencing is expected as this setup is a little complicated and then gets simpler once you are ready to fly.

http://www.helifreak.com/showthread.php?t=373685

RMJ22 · 05-18-2012, 11:02 PM

Thank you for the link - finding it very helpful!

-kenny- · 05-19-2012, 02:07 AM

If you're still having problems, pm me. I have out a complete wiring guide before for fellow helifreaks.

05-08-2012, 07:34 PM	#1
rhattan503 Registered Users Join Date: Jan 2012 Location: Shreveport, LA	Setting up 450 Pro V2 with DX6i Help I currently have an Align Trex 450 Pro V2 (3GX), Spektrum DX6i transmitter and Spektrum AR6200 receiver. This is my first heli and Helifreak has been very useful. I am having difficulty finding the exact wiring needed to bind my Spektrum DX6i to Spektrum AR6200 receiver (See pictures). I have tried using the binding plug in BATT/BIND pins on receiver and have power running through AUX 1 pins. Receiver and satellite attachment continue to blink even when transmitter indicates it's in bind mode. I have tried numerous searches here but haven't found enough information along with wiring to include 3GX. Can anyone help a n00b? Attached Thumbnails

05-10-2012, 10:09 PM	#2
RMJ22 Registered Users Join Date: Mar 2008 Location: Shreveport, LA	Does anybody know of a thread or video to help with initial set-up for this? __________________ Trex 450 SE V2, all stock, S3153MG 's on cyclic, S9257 on tail, Quark, 430XL, RCE-BL35X ESC, 12T pinion Gobby 500, Quantum, BLS153 cyclic, MKS HBL980 tail, SK540 FBL, CC Talon 90 ESC, 21T pinion, DX8

05-10-2012, 10:17 PM	#3
Full Montee Registered Users My HF Map location Join Date: Feb 2011 Location: Virginia	OP search my name for posts on this. Its been a few months and the 3GX may have been updated, but you have the gear needed for how I've done it in the past. If my other posts don't help reply here or PM me. __________________ Robert "Full" Montee Whiplash \| T-Rex 600N Awesome RC Hobbies

05-16-2012, 10:34 PM	#4
RMJ22 Registered Users Join Date: Mar 2008 Location: Shreveport, LA	Montee, thanks for the help, I'm trying to search your posts, but dont' know how to do an OP search? Can you point me to some sort of wiring diagram that shows what plugs where? And then how to set up the radio? Other issues: here to plug the ESC power. Also, simple as it sounds, the Tx and Rx won't bind. . . __________________ Trex 450 SE V2, all stock, S3153MG 's on cyclic, S9257 on tail, Quark, 430XL, RCE-BL35X ESC, 12T pinion Gobby 500, Quantum, BLS153 cyclic, MKS HBL980 tail, SK540 FBL, CC Talon 90 ESC, 21T pinion, DX8

05-17-2012, 12:01 AM	#5
Full Montee Registered Users My HF Map location Join Date: Feb 2011 Location: Virginia	What I was trying to say is Original Poster, you, do a search for me. What you're experiencing is expected as this setup is a little complicated and then gets simpler once you are ready to fly. http://www.helifreak.com/showthread.php?t=373685 __________________ Robert "Full" Montee Whiplash \| T-Rex 600N Awesome RC Hobbies

05-18-2012, 11:02 PM	#6
RMJ22 Registered Users Join Date: Mar 2008 Location: Shreveport, LA	Thank you for the link - finding it very helpful! __________________ Trex 450 SE V2, all stock, S3153MG 's on cyclic, S9257 on tail, Quark, 430XL, RCE-BL35X ESC, 12T pinion Gobby 500, Quantum, BLS153 cyclic, MKS HBL980 tail, SK540 FBL, CC Talon 90 ESC, 21T pinion, DX8

05-19-2012, 02:07 AM	#7
-kenny- Registered Users Join Date: Nov 2010 Location: Belgium	If you're still having problems, pm me. I have out a complete wiring guide before for fellow helifreaks. __________________ Mikado Logo 600 mini Vbar - Outrage fusion50 ar7200bx - goblin 700 mini Vbar - dx7s - powerlab6

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode