![]() |
|
| Register | FAQ | PM | News | Events | Groups | Blogs | Calendar | Mark Forums Read |
![]() |
|
Unregistered
|
||||||
| Engines and Mufflers Having problems or need advice on Engines or Mufflers? |
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 |
|
Registered Users
Join Date: Jul 2008
Location: Moreno Valley CA
|
I just want to give a shout out to rich verano of ys service. i have an older .91AC 4 cycle airplane engine that apparently had a design change and as a result, my $120 head that I bought from central hobbies didn't fit and a new case was another $100. rich said he would sell me one for $20 and reseat the crank and bearings on the new crank for a whopping $15. he was true to his word and i got the engine back two days after I called him for an update. the good part was still to come because I had never rebuilt a 4c and didn't know anything about timing...and again, YS came to the rescue walking me through the cam placement and lifter gap.
it's good to know that you are using a product that has such good long term support. thank you to both rich and jeremy.
__________________
converting nitro into noise since the 70's. |
|
|
|
![]() |
|
Unregistered
|
||||||
| Engines and Mufflers Having problems or need advice on Engines or Mufflers? |
| Thread Tools | |
| Display Modes | |
|
|