Is the MCPx like this? - Page 3

BigRHS · 06-13-2012, 12:51 PM

Quote:

Originally Posted by Talesin

Well, AS3X is more of just a brand name for the base code it seems, and appears to have been primarily written with CP in mind; I wouldn't be surprised if the mSRX adaptation was a bit of a slapdash given that they had to cut out a majority of the internal mixing to make it work with fixed pitch at all; even with the mQX they effectively have collective, just distributed across the rotors.

I'm beginning to suspect that I may just have a 'bad one' though.

I think you have pretty much hit the nail on the head for the most part as far as the problem with this bird. But maybe yours is just a little bit worse then ours. They maybe some out there are are better and some that are worse. Don't understand why that would happen, but it could be the case.
But I did spend a lot of time adjusting and playing with the mixes to finally get mine it to fly the way it flies now. I almost got frustrated to the point of giving up one time myself !
A beginner just starting out on this heli, would have a terrible time trying to figure out how to get it to fly the way it can.

ronj · 06-13-2012, 03:58 PM

Quote:

Originally Posted by BigRHS

I think you have pretty much hit the nail on the head for the most part as far as the problem with this bird. But maybe yours is just a little bit worse then ours. They maybe some out there are are better and some that are worse. Don't understand why that would happen, but it could be the case.
But I did spend a lot of time adjusting and playing with the mixes to finally get mine it to fly the way it flies now. I almost got frustrated to the point of giving up one time myself !
A beginner just starting out on this heli, would have a terrible time trying to figure out how to get it to fly the way it can.

BigRHS, yea but look at all you've learned in the process. Priceless....

koi-fish · 06-13-2012, 05:45 PM

++1........

lespaulrob · 06-13-2012, 06:29 PM

Yeah, I feel like I have to tweak things on the MSRX more than I would something like the MCX2 (maybe not?) and am happy to have this as my first bird. Granted I crashed a lot when I first got it (no, really...A LOT), but what I've learned by first not giving up and second being willing to accept my insecurities and unknowns as a pilot. In the end, I know that I can carry this forward to my next heli which will VERY likely be an MCPX.

BigRHS · 06-13-2012, 08:03 PM

Quote:

Originally Posted by ronj

BigRHS, yea but look at all you've learned in the process. Priceless....

Aman.........that's why I love it sooo much now ! I would go through all the time and effort again knowing what I know now and how much it helped !
I learned how to do the mixes in my DX6i and what they do, and better control of the cyclic and collective and a much better understanding of how each one controls the helicopter........so yea, it has been worth it and now I love both of my MSRX's and would never part with them.............well, ok...........maybe I got a little carried away, for the right price I would part with them.....LOL !
But it was a little frustrating at the beginning though.

burnoutboy · 06-14-2012, 10:28 AM

What's a good place to go to learn about the DX6i and the different mixes. I'm guessing reading the manual wouldn't hurt as a start. Any other good sources?

stiletto01 · 06-14-2012, 11:20 AM

Quote:

Originally Posted by burnoutboy

What's a good place to go to learn about the DX6i and the different mixes. I'm guessing reading the manual wouldn't hurt as a start. Any other good sources?

The folks over at RC-help.com have a great set of videos

BigRHS · 06-14-2012, 01:08 PM

Quote:

Originally Posted by burnoutboy

What's a good place to go to learn about the DX6i and the different mixes. I'm guessing reading the manual wouldn't hurt as a start. Any other good sources?

Here is a good forum to do some reading and learning about the DX6i and Spektrum Radio's in general. I have learned a few things there.

http://www.helifreak.com/forumdisplay.php?f=101

06-13-2012, 05:45 PM	#43
koi-fish Registered Users Join Date: Jan 2012 Location: Houston, TX	++1........ __________________ /MSRX, MCPX, Nano, 1SQ, several 130x, Gaui X2, 300x, 450x, DX8, Harley Road King To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. "It's not getting any smarter out there, you have to come to grips with stupidity and make it work for you" - Frank Zappa

06-14-2012, 10:28 AM	#46
burnoutboy Registered Users Join Date: Jan 2012 Location: Baltimore, MD	What's a good place to go to learn about the DX6i and the different mixes. I'm guessing reading the manual wouldn't hurt as a start. Any other good sources? __________________ DSMX DX6i, MH mCX2, mSR, BL RKH mSR X, 3 X mCP X v.1 (one stocker, one destined for DBL, one destined for DBL mini130X), Lachmund mQX PM me for your soldering and mSR X BL build needs.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-13-2012, 06:29 PM	#44
lespaulrob Registered Users Join Date: May 2012 Location: Nashville, TN USA	Yeah, I feel like I have to tweak things on the MSRX more than I would something like the MCX2 (maybe not?) and am happy to have this as my first bird. Granted I crashed a lot when I first got it (no, really...A LOT), but what I've learned by first not giving up and second being willing to accept my insecurities and unknowns as a pilot. In the end, I know that I can carry this forward to my next heli which will VERY likely be an MCPX.