START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Synergy Model Helicopters Synergy Model Helicopters Support |
|
LinkBack | Thread Tools | Display Modes |
02-12-2013, 07:14 AM | #1 (permalink) |
Registered Users
Join Date: Jan 2011
|
Hacker Turnado A50-12L (470KV) bearing size?
Does anybody know them? I was hoping to order some before pulling my motor. Thanks.
__________________
Nitro: Synergy N5c, Synergy N7 Electric: Synergy E7, Synergy E5, Logo 600SX, Henseleit TDR |
Sponsored Links | |||
Advertisement |
|
04-05-2013, 10:04 PM | #2 (permalink) |
Registered Users
Join Date: Jun 2006
|
You proably don't need it by now, but figure its not a bad idea to add to it for others who are searching. I was looking for this information just last week and didn't find any info myself for the same motor. Well low and behold was just came across a new motor site in the winding forum here on HF and it has the Hacker A50:
1xMR148zz / 2xMR128zz - http://lambertus.info/?hacker-turnado-a50,18 Still have yet to crack my motor open and verify the info. Wynn
__________________
Logo 550sx |
04-06-2013, 12:48 PM | #3 (permalink) |
Registered Users
Thread Starter
Join Date: Jan 2011
|
Hacker Turnado A50-12L (470KV) bearing size?
Great...thanks. Believe it or not, I still haven't gotten around to ordering them yet...been to busy flying and tuning a new nitro...so this is very helpful. Really appreciate it.
__________________
Nitro: Synergy N5c, Synergy N7 Electric: Synergy E7, Synergy E5, Logo 600SX, Henseleit TDR |
Thread Tools | |
Display Modes | |
|
|