START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
JR and Spektrum Radios and Electronics JR and Spektrum Radios, Gyros, Servos, Etc. |
|
LinkBack | Thread Tools | Display Modes |
05-26-2013, 07:20 PM | #1 (permalink) |
Registered Users
Join Date: May 2006
|
9303 Gimbal Spring
The elevator gimbal spring broke in my 9303. Is there anywhere I can buy one without sending the TX in to Horizon for service?
|
Sponsored Links | |||
Advertisement |
|
05-27-2013, 06:57 PM | #2 (permalink) |
Registered Users
Join Date: Jun 2008
|
Do a forum search.IIRC there was someone here who bought a bunch of them and had extras.IIRC it was for a 9503 but Ill bet they are similar.
If not you might try www.radiosouthrc.com
__________________
Too many helis & Too many planks Lots of DX radios & A couple Futaba 72mhz radios AMA member & Full scale plank driver HELIFREAK !!! |
05-30-2013, 03:13 PM | #3 (permalink) |
Registered Users
Thread Starter
Join Date: May 2006
|
Hey thanks...I found a set and put one in but they're heavy duty I think. The stick is a lot stiffer now at the softest setting.
There were lots of links to Futaba springs in my search....if in fact they're different. I suspect the TX springs are the same physical size from manufacturer to manufacturer just different tension...I'll give Radio South a call.... |
Thread Tools | |
Display Modes | |
|
|