Post your 500 videos and pictures here! - Page 3

fireup · 01-02-2008, 08:05 PM

2rbrimmer, the tail fin, one of the landing skids and landing skid rods still looks brand new, send them to me and I can make mine look band new again.

2rbimmer · 01-02-2008, 09:07 PM

Quote:

Originally Posted by Jaso

That isn't a nice picture of your Trex 500 there mate .
No good at all .

So , you are using 2.4 and had RX reset ?
More I read about these brown outs the more scared I am to fly mine .

True, Not good at ALL.
Yes, it was my first time to experience lock out.

Quote:

Originally Posted by fireup

2rbrimmer, the tail fin, one of the landing skids and landing skid rods still looks brand new, send them to me and I can make mine look band new again.

tail fin good, only a scratch! i'm keeping

you can have the good landing skid and the skid rod's, one bent though.

smokenjoe50 · 01-02-2008, 09:29 PM

That looks a lot better than mine. Did the frames survive?

fireup · 01-02-2008, 09:31 PM

Quote:

Originally Posted by 2rbimmer

tail fin good, only a scratch! i'm keeping
you can have the good landing skid and the skid rod's, one bent though.

Just kidding... I'm sure more parts will be in LHS soon.

cudaboy_71 · 01-02-2008, 11:26 PM

here's mine...just waiting on pinions to wake up the 5s packs.

Finless · 01-02-2008, 11:33 PM

Hehehehe Cuda... I think 5S is not going to be the pack of choice long run... The motor seems to be dialed in for 6S..... WE NEED A LIGHT 2800 PACK on 6S man!
In the mean time 5S 3300 is just a stop gap.... My opinion only

Bob

ChrisH · 01-02-2008, 11:44 PM

Wow, that's quite a fleet you've got there cuda. The 500 looks awesome! I hope to post mine on here when I get it

jrumer · 01-02-2008, 11:47 PM

Where the hek is everyone getting these 500's??????????

ChrisH · 01-02-2008, 11:49 PM

Online I suppose. I'd give a list of a few places that have them, but I think that might be against the rules.

jrumer · 01-02-2008, 11:55 PM

hey trexflyer02 what trex's are you flying??

ChrisH · 01-03-2008, 12:04 AM

A 450 as of right now ... but a 500CF is on the way

jrumer · 01-03-2008, 12:07 AM

Im trying to find someone who could tell me the flying difference on the 600n belt and torque tube

ChrisH · 01-03-2008, 12:36 AM

I would probably surf the 600N forums then.

dj_rpr · 01-03-2008, 12:46 AM

not a clear canopy mate, this is what i did to my yellow one...

jrumer · 01-03-2008, 12:53 AM

what happened???

dj_rpr · 01-03-2008, 01:00 AM

nothing happened, check a few posts back....i painted it so sanded back the canopy.

Jaso · 01-03-2008, 02:19 AM

Here is mine guys .

skeppley · 01-03-2008, 07:57 AM

And some more

I use some extra Trex 600 battery straps on mine, they work much better than the ones supplied with the 500 kit.

cudaboy_71 · 01-03-2008, 07:57 AM

Quote:

Originally Posted by Finless

Hehehehe Cuda... I think 5S is not going to be the pack of choice long run... The motor seems to be dialed in for 6S..... WE NEED A LIGHT 2800 PACK on 6S man!
In the mean time 5S 3300 is just a stop gap.... My opinion only

Bob

yeah...but, they were two lonely 5s packs sitting on my shelf collecting dust. so, why not

huskynox · 01-03-2008, 08:29 AM

My Red CF

01-02-2008, 08:05 PM	#41
fireup Team Taco CEO Join Date: Oct 2006 Location: Anaheim, CA	2rbrimmer, the tail fin, one of the landing skids and landing skid rods still looks brand new, send them to me and I can make mine look band new again. __________________ Kevin Don't Taco My Pack, Bro! , Why crash when you can POUND it!

01-02-2008, 11:26 PM	#45
cudaboy_71 Registered Users My HF Map location Join Date: Jun 2005 Location: sacramento, ca	here's mine...just waiting on pinions to wake up the 5s packs. __________________ ˙ʇı ʞɐǝɹq 'ǝʞoɹq ʇ,uıɐ ʇı ɟı

01-02-2008, 11:33 PM	#46
Finless Team Taco VP Thread Starter My HF Map location Join Date: Nov 2005 Location: Stanton, Ca. USA	Hehehehe Cuda... I think 5S is not going to be the pack of choice long run... The motor seems to be dialed in for 6S..... WE NEED A LIGHT 2800 PACK on 6S man! In the mean time 5S 3300 is just a stop gap.... My opinion only Bob __________________ "Don't Taco My Pack Dude!" To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.*

01-02-2008, 11:44 PM	#47
ChrisH HF Support Join Date: Aug 2007 Location: CA	Wow, that's quite a fleet you've got there cuda. The 500 looks awesome! I hope to post mine on here when I get it __________________ Edge Rotorblades Thor/Voltz Batteries 450 Pro V-Bar 130X

01-02-2008, 11:49 PM	#49
ChrisH HF Support Join Date: Aug 2007 Location: CA	Online I suppose. I'd give a list of a few places that have them, but I think that might be against the rules. __________________ Edge Rotorblades Thor/Voltz Batteries 450 Pro V-Bar 130X

01-02-2008, 09:29 PM	#43
smokenjoe50 Registered Users Join Date: Sep 2006 Location: usa	That looks a lot better than mine. Did the frames survive?

01-02-2008, 11:47 PM	#48
jrumer Registered Users Join Date: Oct 2007 Location: Lexington, Ky	Where the hek is everyone getting these 500's??????????

01-02-2008, 11:55 PM	#50
jrumer Registered Users Join Date: Oct 2007 Location: Lexington, Ky	hey trexflyer02 what trex's are you flying??

01-03-2008, 12:04 AM	#51
ChrisH HF Support Join Date: Aug 2007 Location: CA	A 450 as of right now ... but a 500CF is on the way __________________ Edge Rotorblades Thor/Voltz Batteries 450 Pro V-Bar 130X

01-03-2008, 12:07 AM	#52
jrumer Registered Users Join Date: Oct 2007 Location: Lexington, Ky	Im trying to find someone who could tell me the flying difference on the 600n belt and torque tube

01-03-2008, 12:36 AM	#53
ChrisH HF Support Join Date: Aug 2007 Location: CA	I would probably surf the 600N forums then. __________________ Edge Rotorblades Thor/Voltz Batteries 450 Pro V-Bar 130X

01-03-2008, 12:46 AM	#54
dj_rpr Registered Users Join Date: Dec 2007	not a clear canopy mate, this is what i did to my yellow one...

01-03-2008, 12:53 AM	#55
jrumer Registered Users Join Date: Oct 2007 Location: Lexington, Ky	what happened???

01-03-2008, 01:00 AM	#56
dj_rpr Registered Users Join Date: Dec 2007	nothing happened, check a few posts back....i painted it so sanded back the canopy.

01-03-2008, 02:19 AM	#57
Jaso Registered Users Join Date: Feb 2005 Location: Victoria, Australia	Here is mine guys . Attached Thumbnails __________________ Jason Synergy E7 , Goblin 630 , Trex 500, MCPX, T8FG Super .

01-03-2008, 07:57 AM	#58
skeppley Registered Users My HF Map location Join Date: Oct 2006 Location: Lake Wynonah PA	And some more I use some extra Trex 600 battery straps on mine, they work much better than the ones supplied with the 500 kit. Attached Thumbnails Last edited by skeppley; 01-04-2008 at 03:43 PM..

01-03-2008, 08:29 AM	#60
huskynox Registered Users Join Date: May 2007 Location: Los Angeles	My Red CF Attached Thumbnails __________________ 500CF - 3650's, 3500G, Spartan, Stock ESC, Stock Motor, TP 6s Pro Power 2700mAh PROTOS - 3650's, 3500G, Spartan, Scorpion 3026-880, ICE Lite 100, TP 6s Pro Power 2700mAh 600E - 8717's, 8900G, Spartan, Scorpion 4025-890, CC HV85, TP Pro Power 8s 3850mAh Kasama Srimok - 8717HV's, 8900G, AR7100R, Spartan, YS 91SR, Hatori SB19 Last edited by huskynox; 01-03-2008 at 08:07 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode