Two Medusa 036-050-1600 (1600KV 6S) Motors w/Heat sinks

Bruce H · 02-10-2008, 05:54 PM

The first is a Medusa 036-050-1600 that has not been ran. It has one of the mount holes stripped about half way through and a flat spot filed on the 5mm shaft for a pinion grub screw. It also has a NEW wrap around heat sink that comes with it. I sent this motor to Medusa to see if the stripped hole needed any fixing and they told me the motor has no damage and operation will not be effected by the half stripped mount hole. Medusa said to use a longer mount bolt but not to exceed 5mm in length into the can. Also there are 4 mounting holes and a person could just use the other two holes. (left picture)

The second is an identical Medusa 036-050-1600 that has about 15 flights on it in a Trex 600e helicopter. Also comes with a used wrap around heat sink. (right picture)

They are strong 600e motors and have about the same power as a stock 600XL motor. I have sold my T600e heli's and no longer need these motors.

These motors sell for $119.95 NEW at RC Hover where I purchased them. The heat sinks run about $6.00 each. This is a total of about $250.00. I will sell both motors and both heat sinks as a package deal for $145.00 shipped anywhere in the lower 48 US States. This price also includes any Pay Pal fees if you wish to pay via Pay Pal.

Thanks for looking,
Bruce

Bruce H · 02-14-2008, 07:09 AM

Bruce H · 02-20-2008, 10:12 PM

Bruce H · 02-24-2008, 10:29 PM

Price Drop to $125.00 shipped for both motors.

Bruce H · 02-28-2008, 04:36 PM

Bruce H · 03-15-2008, 09:47 AM

Bruce H · 03-25-2008, 07:53 PM

Bruce H · 04-02-2008, 07:09 AM

These motors are perfect for a Trex 500 and at a very good price.

Bruce H · 04-05-2008, 03:31 PM

The used motor is sold!

The new unused motor is still available and I will ship it to the lower 48 US States for $70.00. These are perfect for a Trex 500 on a 6S set up.

Thanks for looking,
Bruce

Bruce H · 04-12-2008, 11:07 PM

Bruce H · 04-16-2008, 10:37 PM

Bruce H · 04-17-2008, 08:05 PM

Both motors have been SOLD!

Thanks for looking,
Bruce

02-10-2008, 05:54 PM	#1
Bruce H Registered Users My HF Map location Join Date: Oct 2006 Location: Colorado	Two Medusa 036-050-1600 (1600KV 6S) Motors w/Heat sinks The first is a Medusa 036-050-1600 that has not been ran. It has one of the mount holes stripped about half way through and a flat spot filed on the 5mm shaft for a pinion grub screw. It also has a NEW wrap around heat sink that comes with it. I sent this motor to Medusa to see if the stripped hole needed any fixing and they told me the motor has no damage and operation will not be effected by the half stripped mount hole. Medusa said to use a longer mount bolt but not to exceed 5mm in length into the can. Also there are 4 mounting holes and a person could just use the other two holes. (left picture) The second is an identical Medusa 036-050-1600 that has about 15 flights on it in a Trex 600e helicopter. Also comes with a used wrap around heat sink. (right picture) They are strong 600e motors and have about the same power as a stock 600XL motor. I have sold my T600e heli's and no longer need these motors. These motors sell for $119.95 NEW at RC Hover where I purchased them. The heat sinks run about $6.00 each. This is a total of about $250.00. I will sell both motors and both heat sinks as a package deal for $145.00 shipped anywhere in the lower 48 US States. This price also includes any Pay Pal fees if you wish to pay via Pay Pal. Thanks for looking, Bruce Attached Thumbnails __________________ WOW! did I do that?

02-14-2008, 07:09 AM	#2
Bruce H Registered Users Thread Starter My HF Map location Join Date: Oct 2006 Location: Colorado	ttt __________________ WOW! did I do that?

02-20-2008, 10:12 PM	#3
Bruce H Registered Users Thread Starter My HF Map location Join Date: Oct 2006 Location: Colorado	ttt __________________ WOW! did I do that?

02-24-2008, 10:29 PM	#4
Bruce H Registered Users Thread Starter My HF Map location Join Date: Oct 2006 Location: Colorado	Price Drop to $125.00 shipped for both motors. __________________ WOW! did I do that?

02-28-2008, 04:36 PM	#5
Bruce H Registered Users Thread Starter My HF Map location Join Date: Oct 2006 Location: Colorado	ttt __________________ WOW! did I do that?

03-15-2008, 09:47 AM	#6
Bruce H Registered Users Thread Starter My HF Map location Join Date: Oct 2006 Location: Colorado	ttt __________________ WOW! did I do that?

03-25-2008, 07:53 PM	#7
Bruce H Registered Users Thread Starter My HF Map location Join Date: Oct 2006 Location: Colorado	ttt __________________ WOW! did I do that?

04-02-2008, 07:09 AM	#8
Bruce H Registered Users Thread Starter My HF Map location Join Date: Oct 2006 Location: Colorado	These motors are perfect for a Trex 500 and at a very good price. __________________ WOW! did I do that?

04-05-2008, 03:31 PM	#9
Bruce H Registered Users Thread Starter My HF Map location Join Date: Oct 2006 Location: Colorado	The used motor is sold! The new unused motor is still available and I will ship it to the lower 48 US States for $70.00. These are perfect for a Trex 500 on a 6S set up. Thanks for looking, Bruce __________________ WOW! did I do that?

04-12-2008, 11:07 PM	#10
Bruce H Registered Users Thread Starter My HF Map location Join Date: Oct 2006 Location: Colorado	TTT __________________ WOW! did I do that?

04-16-2008, 10:37 PM	#11
Bruce H Registered Users Thread Starter My HF Map location Join Date: Oct 2006 Location: Colorado	ttt __________________ WOW! did I do that?

04-17-2008, 08:05 PM	#12
Bruce H Registered Users Thread Starter My HF Map location Join Date: Oct 2006 Location: Colorado	Both motors have been SOLD! Thanks for looking, Bruce __________________ WOW! did I do that?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode