Savox? has anyone heard of it?

Kingsford · 05-14-2008, 01:45 AM

Please refer to the attachment!
Got it as a forward mail from a friend.
Looks good in spec!

Kingsford · 05-14-2008, 01:49 AM

666yeti666 · 06-03-2008, 09:53 AM

This is a new servobrand from Taiwan and will be presented by Mikado Helicopters from Germany, Europe.
They were presented in a test for a German magazine called "Rotor " in the new flybarless Logo 400
Currently I'm thinking for using the savox in my stretched logo 10 3D. They look very promising for a fraction of the cost of a Futaba S9650 which has the same sizes.

This is the test about the Logo 400 : http://www.modellsport.de/bilderport...r/0608LOGO.pdf

Kingsford · 08-07-2008, 01:37 AM

I've also found a film about Savox SH1350

http://tw.youtube.com/watch?v=MRZT4fy9y5I

cudaboy_71 · 08-07-2008, 09:52 AM

can you post the specs? the attachment is too small to read.

Kingsford · 08-13-2008, 06:04 AM

here is the spec ! Google does rock, you can find anything by it.

cudaboy_71 · 08-13-2008, 09:31 AM

thanks. the SC-1257 looks interesting. but, still slower and weaker than the z9100s. maybe if it was 1/2 the price??? know of anyone selling them?

Kingsford · 08-13-2008, 10:58 PM

cudyboy, i have googled again and found spec of JR's z9100s as follow:
yes, it's 0.02 second faster however the torque is much less than 1257, its torque at 6V is 180ounce(= 5.10 kg, if i calculated it right). @6V SC1257 has 0.07/10kg.
regarding weakness, sc1257 has taitanium alloy gears it should be stronger.
I don't know where to get it. i will google more and see if i can found it.

Z9100S Digital Ultra-Speed MG Servo Specs
Size Category: Standard Type: Digital Torque: 150 oz/in @ 4.8V, 180 oz/in @ 6V Speed: .08 sec / 60 degrees @ 4.8V, .06 sec / 60 degrees @ 6V Dimensions (WxLxH): 0.827"x1.59"x1.569" Weight: 2.3 oz Bushing Or Bearing: Bearing Bearing: Dual Motor Type: Coreless Gear Type: Metal Application: Surface vehicles

cudaboy_71 · 08-13-2008, 11:29 PM

the z9100s runs at 8v though. i know, a couple of guys at the field are running them. .04sec...super fast and scads of torque.

maybe the savox do 8v, too. but, i can't tell for sure by the spec.

ShinOBIWAN · 08-14-2008, 12:08 AM

The bear a passing similarity to the newish Align servo's, is savox their OEM I wonder...

05-14-2008, 01:45 AM	#1
Kingsford Join Date: May 2008	Savox? has anyone heard of it? Please refer to the attachment! Got it as a forward mail from a friend. Looks good in spec! Attached Thumbnails

06-03-2008, 09:53 AM	#3
666yeti666 Join Date: Jun 2006 Location: the netherlands	This is a new servobrand from Taiwan and will be presented by Mikado Helicopters from Germany, Europe. They were presented in a test for a German magazine called "Rotor " in the new flybarless Logo 400 Currently I'm thinking for using the savox in my stretched logo 10 3D. They look very promising for a fraction of the cost of a Futaba S9650 which has the same sizes. This is the test about the Logo 400 : http://www.modellsport.de/bilderport...r/0608LOGO.pdf __________________ _____________ Brushless rules

08-07-2008, 09:52 AM	#5
cudaboy_71 My HF Map location Join Date: Jun 2005 Location: sacramento, ca	can you post the specs? the attachment is too small to read. __________________ ˙ʇı ʞɐǝɹq 'ǝʞoɹq ʇ,uıɐ ʇı ɟı

08-13-2008, 09:31 AM	#7
cudaboy_71 My HF Map location Join Date: Jun 2005 Location: sacramento, ca	thanks. the SC-1257 looks interesting. but, still slower and weaker than the z9100s. maybe if it was 1/2 the price??? know of anyone selling them? __________________ ˙ʇı ʞɐǝɹq 'ǝʞoɹq ʇ,uıɐ ʇı ɟı

08-13-2008, 11:29 PM	#9
cudaboy_71 My HF Map location Join Date: Jun 2005 Location: sacramento, ca	the z9100s runs at 8v though. i know, a couple of guys at the field are running them. .04sec...super fast and scads of torque. maybe the savox do 8v, too. but, i can't tell for sure by the spec. __________________ ˙ʇı ʞɐǝɹq 'ǝʞoɹq ʇ,uıɐ ʇı ɟı

08-07-2008, 01:37 AM	#4
Kingsford Join Date: May 2008	I've also found a film about Savox SH1350 http://tw.youtube.com/watch?v=MRZT4fy9y5I

08-13-2008, 10:58 PM	#8
Kingsford Join Date: May 2008	cudyboy, i have googled again and found spec of JR's z9100s as follow: yes, it's 0.02 second faster however the torque is much less than 1257, its torque at 6V is 180ounce(= 5.10 kg, if i calculated it right). @6V SC1257 has 0.07/10kg. regarding weakness, sc1257 has taitanium alloy gears it should be stronger. I don't know where to get it. i will google more and see if i can found it. Z9100S Digital Ultra-Speed MG Servo Specs Size Category: Standard Type: Digital Torque: 150 oz/in @ 4.8V, 180 oz/in @ 6V Speed: .08 sec / 60 degrees @ 4.8V, .06 sec / 60 degrees @ 6V Dimensions (WxLxH): 0.827"x1.59"x1.569" Weight: 2.3 oz Bushing Or Bearing: Bearing Bearing: Dual Motor Type: Coreless Gear Type: Metal Application: Surface vehicles

08-14-2008, 12:08 AM	#10
ShinOBIWAN My HF Map location Join Date: May 2008	The bear a passing similarity to the newish Align servo's, is savox their OEM I wonder... __________________ Ant Increment, dinkrement To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode