Gearing for a Century 600 plust

bio87 · 08-24-2008, 12:27 PM

I just bought at Century 600 plus motor and since i'm new with the Huri I have no clue how to gear for this motor. The motor specs are
Max Current: 60 Amps
Max Eff: 90%
Poles: 8
KV: 1110
Weight: 276g
I have a 68T 1st gear and a 20TOWB with a 61T main. Also what is a good head speed on these size heli's. I'm so used to my trex 450 with its 2800 head speed, but i'm kinda affraid to push the huri's blades to 2800. Thanks in advance

skigolfmike · 08-24-2008, 10:09 PM

Get a 20, 21 & 22. If you have a 68 front main gear, you have the RevCo .6mod gears, so you need the RevCo pinions. The 20 will give you about 2000-2100 headspeed. 2000 head speed is max with woodies. 2300 - 2500 is max with CF blades and CNC head.

Have fun.

bio87 · 08-24-2008, 11:32 PM

Yes it is the RevCo gears,I bought the kit used so i'm still learning what all he had in it. He also sent some hard ones pinions with are .6m teeth so I think they will work.

08-24-2008, 12:27 PM	#1
bio87 Registered Users My HF Map location Join Date: Mar 2007 Location: Gainesville, Ga	Gearing for a Century 600 plust I just bought at Century 600 plus motor and since i'm new with the Huri I have no clue how to gear for this motor. The motor specs are Max Current: 60 Amps Max Eff: 90% Poles: 8 KV: 1110 Weight: 276g I have a 68T 1st gear and a 20TOWB with a 61T main. Also what is a good head speed on these size heli's. I'm so used to my trex 450 with its 2800 head speed, but i'm kinda affraid to push the huri's blades to 2800. Thanks in advance

08-24-2008, 10:09 PM	#2
skigolfmike Registered Users My HF Map location Join Date: Jan 2008 Location: Dayton, OH	Get a 20, 21 & 22. If you have a 68 front main gear, you have the RevCo .6mod gears, so you need the RevCo pinions. The 20 will give you about 2000-2100 headspeed. 2000 head speed is max with woodies. 2300 - 2500 is max with CF blades and CNC head. Have fun. __________________ TRex700N, TRex600NP Logo 400 VBar, Furion 450, Blade 400 Gooie 200 (2), CX2, mSR AMA# 3066

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-24-2008, 11:32 PM	#3
bio87 Registered Users Thread Starter My HF Map location Join Date: Mar 2007 Location: Gainesville, Ga	Yes it is the RevCo gears,I bought the kit used so i'm still learning what all he had in it. He also sent some hard ones pinions with are .6m teeth so I think they will work.