View Single Post
Old 05-29-2006, 09:15 AM   #23 (permalink)
Finless
Team Taco VP
 
Posts: 34,528
Thread Starter Thread Starter
 
My HF Map location
Join Date: Nov 2005
Default

Put a servo in the throttle channel and make sure you can move it...
If thsat tests OK then you either have a broken wire from the RX to the ESC (the white wire) or you have a bad ESC. That constant beep is what the ESC calls "model locator" and it will do that if
1) The RX is not seeing a signal from the TX
2) The ESC is not getting it's control signal from the RX.

Bob
Finless is offline        Reply With Quote