here's a photo with both wing panels and the spoilers on them. I've got to transfer the outlines of the blue tape onto the balsa, and then remove the balsa wood, fill in the gap below the wing sheeting. All of that will be done after i remove the flap and cap its leading edge with a balsa stick. The wing trailing edge will also get a 1/4" thick cap to stiffen it up as well. I'll probably build the leading edge slats before i go any further with the flaps and spoilers, that way i can get the wingtips shaped and the inner balsa leading edge block (the one that will be going into the fuselage) shaped, then i can finish the wing panels and the fuselage glove sheeting.
__________________
Comparf Eurosport
1/7 F-14D
Rave 450, scorpion -10, DS285MG, 3500G, Spartan, 4s 2200 outrage, 6100e, 350mm radix
lookin for another Vibe 50
|