View Single Post
Old 10-09-2009, 11:35 PM   #1 (permalink)
HF Support
Posts: 31,220
My HF Map location
Join Date: May 2006
Default RDLohr's TREX 450 Stronger Battery Mount

RDLohr’s Clearly Superior Products
TREX 450 Battery Mount
This mount provides a strong flexible mounting surface for your battery. (Inspired by copterklutz)

Mount in place of stock battery tray. Use stock screws to mount. Once you place Velcro on top for your battery it will raise the mounting surface to the height of the frame edges. Be very careful placing Velcro because it sticks very well to the Lexan!

Note: Peel protective paper off all Lexan before use (if there is any)
Note: Edges can be sanded with 220 grit sand paper if the fit is too tight or if there are rough edges or burrs.
Note: Clean any machine oil off the screws before installation
Note: For additional security, add a touch of CA when installing the screws (Optional)

Good Luck and thanks, Rick [email protected] or helifreak: rdlohr

Copyright 2006,2007,2008, 2009 RDLohr’s Clearly Superior Products. All rights reserved.

Attached Thumbnails
Click image for larger version

Name:	TREX 450 Battery Mount.jpg
Views:	4829
Size:	15.5 KB
ID:	119132   Click image for larger version

Name:	Side View.jpg
Views:	6991
Size:	61.3 KB
ID:	119133  
Helifreak, the place to be!
Oxy5 w/Brain2, Rush 750 w/VBAR,Logo 400SE, 600SE w/NEOs, TREX 450SE, 500, 600, Blade mCPX,130X, 180CFX, Nano QX, Convergence VTOL, MiniProtos w/BD3SX
My products, used by top pilots worldwide, like you!

Last edited by rdlohr; 02-03-2011 at 07:55 PM..
rdlohr is offline        Reply With Quote