View Single Post
Old 02-23-2010, 05:49 AM   #1 (permalink)
MrMel
Registered Users
 
Posts: 13,576
 

Join Date: Apr 2005
Default Videos: MrMel's VBar 101 instruction videos

Hello everyone!

I have started to make a VBar 101 series where I will try to cover the gap between the official videos, the manual and all questions here on the forum.

It will be a deeper dive into the VBar world, to make sure you get the best out of your VBar.
This will include setup both if you using a preset and if you are setting up from scratch, to try to learn you how to do it correctly.

I will make a dedicated page for these videos later, but for now you have to go into my profile on YT

http://www.youtube.com/user/FredrikMelin72

I put up a page on my site with links to all videos here;
http://heli.dacsa.net/MrMelSite/VBar101.htm

Please feel free to comment.
Code:
Version 5.0
  Episode 1 - What's new in V5
  Episode 2 - Event Log
  Episode 3 - Spectrum Analyzer
  Episode 4 - Part 1 - Setting up a new helicopter.
  Episode 4 - Part 2 - Setting up a new helicopter.
  Episode 5 - Advanced Tail Tweaking
  Episode 6 - Main Rotor Tweaking
  Episode 7 - Control Panel overview
  Episode 8 - Sneak peak on the Full sized Blueline
  Episode 9 - Sneak peak of the v5.1 Pro with Governor
  Episode 10 - General concept of running external governor on electrics
  Episode 10  - Wiring the governor

  Episode 13 - Finalizing governor setup (main screen)
  Episode 14 - Step by Step setting up Governor with separate RX
  Episode 15 - Step by Step setting up Governor with Spektrum Satellites/Futaba SBus
  Episode -- Throttle trim issue, highlighting an issue with throttle trim and which workarounds are available.
  Episode 16 - REPLACED BY EP20 Governor on Electrics
  Episode 17 - Governor: Importance of the throttle curves
  Episode 18 - Covering upgrade to 5.2
  Episode 19 - Connect phase sensor to Mini VBar
  Episode 20 - Governor on electrics - Remake
  Episode 21 - Bankswitching on VBar 5.2
 

Generic & Version 4.0
 Episode 1 - Regular VBar (generic)
 Episode 1 - Mini VBar (generic)
 Episode 2 - Sensor alignment (generic)
 Episode 3 - Preventing vibrations (generic)
 Episode 4 - Physical ports (generic)
 Episode 5 - Power distribution (specially AR7100R etc) (generic)
 Episode 6 - Mounting on a helicopter (generic)
 Episode 7 - Connecting ESC and PC (generic)
 Episode 8 - Presets and why they are used.
 Episode 9 - TX Calibration including binding of satellites
 Episode 10 - Rudder adjustments including those not using presets.
 Episode 11 - (Part 1) - Swashplate servo setup
 Episode 11 - (Part 2) - Swashplate servo Expert panel
 Episode 12 - Level Swash
 Episode 13 - Main screen - Main rotor
 Episode 14 - (Part 1) - Main screen - Tail rotor Standard parameters
 Episode 14 - (Part 2) - Main screen - Tail rotor Expert parameters
 Episode 15 - Bankswitching (generic)
 Episode 16 - Live view and autotrim view
 Episode 17 - Finalizing the setup (pitch range, swash driver alignment, including how to see it at the field)
 Episode 18 - Tail Precompensation direction
 Episode 19 - Installing driver signing/certify them on 64-bit system
 Episode 20 - (Part 1) - Deeper dive into the Geometry of a FBL helicopter. (generic)
 Episode 20 - (Part 2) - Deeper dive into the Geometry of a FBL helicopter. (generic)
 Episode 21 - Autotrim, How to set it up, and how to do it. (generic)
 Episode 22 - Optimizer, how it works. (generic)
 Episode 23 - Tail Tweaking & Understanding PID - Part 1 
 Episode 23 - Tail Tweaking & Understanding PID - Part 2
__________________
Gone fishing.. or hunting or something..
http://heli.dacsa.net

Last edited by MrMel; 12-01-2011 at 11:41 AM..
MrMel is offline        Reply With Quote