View Single Post
Old 05-06-2010, 03:25 PM   #29 (permalink)
perfeet
Registered Users
 
Posts: 1,402
 
My HF Map location
Join Date: Dec 2007
Default

Hi

I have a Logo 600 with a Scorpion 4035 500kv motor, 11t mod 1 pinion, 12s lipo, Jive 80HV (using mode 11)
and Turnigy 6s 30c 3600 mah batteries. EC5 connectors.


I used a high quality microphone and Audacity 1.3 to calculate my headspeed today

I plotted graphs from the headspeed calculator vs my headspeed/throttle%.

The result is that I need to have 8% higher throttle curve to obtain the same headspeed as suggested in the calculator. Or said in another way. I get 100 rpm less than suggested in the calculator at any point.

For 2000 rpm I need 79% throttle and for 2200 rpm I need 98%.





My questions are then:
  • Is this because of I use Mode 11 on the Jive?
  • Is my 500 kv motor a much lower actual kv?
  • Should I just increase my throttle% till I get the right rpm in Audacity?
  • When changing between normal/idle 1/idle 2, do you have to land and spool up over again to get the right head speed (sounds strange to me, and not likely)
Attached Thumbnails
Click image for larger version

Name:	Graph.jpg
Views:	214
Size:	62.4 KB
ID:	155299  
__________________
Regards perfeet
perfeet is offline        Reply With Quote