Thread: Gyro Delay 101
View Single Post
Old 07-13-2010, 07:33 PM   #37 (permalink)
airjawed
Registered Users
 
Posts: 5,357
Thread Starter Thread Starter
 
My HF Map location
Join Date: Mar 2008
Default

Quote:
Originally Posted by Epoweredrc View Post
Thanks I will give it a try tommorrow. my servo is .08 sec/60 @ 4.8V it says the 9254 is Speed: 0.06 sec/60 degrees @ 4.8V
So leave the gain at 72% to start or should it be lower you think?
The gain has to adjusted by yourself. You can not copy someone's number. This is because people have different headspeeds, motors, batteries etc. And also because the length of the servo arm varies as well.

So if you'd like set the delay to 0.02 since that is the speed difference. And then try something like 72 if that is what some others are using. If you feel uncomfortable doing this and flying then find someone who is good at it.
__________________
Trex 450 Pro 3xDS410M + MKS8910A+, Align FBL head w/Microbeast, CC 45 [email protected] 3400rpm(max timing, outrunner mode), Scorpion 2221-8 on 14t, Edge FBL main and tail, CF boom, CC BEC @ 6V
airjawed is offline        Reply With Quote