View Single Post
Old 08-14-2010, 10:33 PM   #7 (permalink)
Geffect
Registered Users
 

Join Date: Apr 2010
Default

The graph that gets displayed is 0-100. 0=stick all the way down 50= mid stick and 100=stick at the top.

Before even setting up your pitch curves in the radio you need to make sure you have established a good mechanical setup.. I.e mid stick = 0 deg pitch, and full negative and positive pitch are equal. i.e. -12deg/+12deg..

Once the mechanical setup is correct, then you can change the default linear pitch 'curve' to meet your pitch requirements.

As already mentioned watch the CCPM setup videos, as they will give you all the information you require to do the mechanical and radio setup.

http://video.helifreak.com/?subpath=...CPM_Part_1.wmv
http://video.helifreak.com/?subpath=...CPM_Part_2.wmv

You might want to check out the rest of the 101 video series too:
https://www.helifreak.com/showthread.php?t=52530
Geffect is offline        Reply With Quote