Just thought id share my wag fix - the gyro is a gy401 and servo is a ds420.
Originally i had the gyro mounted upside down on the gyro mount plate.
The plate was fitted to the upper mounting slots in the chassis.
I cured my tail wag by simply lowering the gyro mount plate to the lower slots in the chassis, with the gyro still mounted upside down. I think the gyro was interfering with the servo and causing the wag. I am running the standard tail, belt, servo rod, all standard. gy401 is at 65% gain on HH mode (DX6i TX)
Hope this helps someone!
cheers
|