View Single Post
Old 04-16-2011, 12:17 PM   #17 (permalink)
Registered Users
Posts: 2,260

Join Date: Apr 2010

Thanks for the tips, Bob. I'll close off the fork arms - that would beat tying knots with dental floss... I already have replaced the front canopy mounts with cf epoxied on, and I've also had to replace the back mounts - I used fine piano wire, running it through a drilled 1/32" hole in the plastic just above the boom insert, and shaped it in a V shape with bends on both ends to hold the rear canopy holes in place. It is not quite as good as stock, but much better than no rear mounts at all for sure.
7hvu, 6hv,,Prtos,450Pro, DT520E
some planks

Jumna is offline        Reply With Quote