View Single Post
Old 06-20-2011, 09:03 PM   #32 (permalink)
Blade Forum Support
Posts: 3,663
Thread Starter Thread Starter

Join Date: Feb 2009

Originally Posted by dbennettya View Post
Two of my Walkera 10A ESCs would not start the C05 motor but work fine with HP08-2 motors. The AeoRC 5A esc starts the C05 motor fine and works good. Amp is using this ESC also with good luck.

So I'd recommend the AeoRC 5A or the eBay 7A ESCs ( I haven't tried the eBay 7A ESC).

Good catch buddy. I find it odd that a 10 amp esc wont start the motor a 5amp will very odd. Unless it need a resistor on it between the yellow and blue on the Steve converter Oh or on the converter you are running. Are you using the converter u had in the picture you showed me that converter may not be strong enough to run it.
tntburnett is offline        Reply With Quote