View Single Post
Old 08-12-2011, 07:36 AM   #51 (permalink)
so-fly
Registered Users
Thread Starter Thread Starter
 

Join Date: Mar 2010
Default

Quote:
Originally Posted by dna001 View Post
Actually just looking at so-fly diagram in the first picture its Wrong He has the ESC servo output wires feeding back to the + and - on the board.
The ESC gets its power from the battery and puts out 3 to 5 volts through the servo wire, he is feeding this voltage back to the and main board ?? this will only work if the ESC can suply enough voltage to the run the main board and all motors and servos. its probably can but it would be better to run the main board off of the battery.

Some one correct me if i am wrong :-/
It can work, but in the earlier stages of testing, the board/servos/BL drained too much power requiring a larger battery/discharge rate to function properly. The best combo so far would be the steve converter to save weight and have the proper power to weight ratio. The setup I went through did however push the headspeeds to nearly triple what it was stock and didnt even bog one bit
__________________
ALIGN TREX 250SE 450SE V2 500ESP 550E 600ESP 700E
NOVUS CP
BLADE MSR BLADE SR 120 BLADE SR
so-fly is offline        Reply With Quote