Stripped SK720 from Belt CP 700N and mounted it on Belt CP 6HV:
Setup the makeshift connections on the bench and run the initial wizard that mainly has to do woth SK720 orientation, Spektrum satellites binding, Tx input scaling, servo selection and so on:
Selected the Futaba S9256 as a tail servo and did the operational test, the small Spektrum voltage regulator is a 2A thingy and drops the voltage down for 3 things: tail servo, ESC reference signal and telemetry module. Will have to double check TM1000 specs, maybe it can run off 8.4V directly :
Andy, you were spot on !!! The tail servo as well and kicking . It was just frame rate and pulse width that made it appear dead before
__________________
Jerry
Trex 700N Pro fbl, 600N Pro x 2, 450SE v1, 250 v2 fbl, Compass 6HV fbl, Blade 450x, 400, 300x, 130x, mCPx, 120SR, mQx, mSR, Rotor Concepts HPQ1, Walkera CB180Q, CB100, Novus FP, CP, Esky Hunter, Big Lama.
|