this is aweome! someone over at rcgroups linked me to this, but its not quite working out with plush 25A escs using the 6A firmware.i tried the 6a plush firmware on my 25A plushes and it didnt work out too well. i can tell that the motor has some resistance when the esc is on, but no spinning.
i got the silprog on the atmega 328p 3.3v 8mhz, wires soldered on to the esc and correctly connected to the 328p. it flashes ok and will reflash(verifies too), but the ESC now doesn't respond to RX input, and the MAIN version wont work with BLHeli either(i tried MULTI first).
i am new to BLheli(never used it before) is there anything i have to do to activate the ESC, or is it just plugin it into the RX channel and move the tx stick? i disconnected and reconnected the battery but no dice...
hopefully it will improve my quadcopter, eventually
i noticed this output from copperclad:
Quote:
OlliW SilProg v0.05
r... rok
d... dok0A
i... iok
e... eok
bw... bw:03000000020CE906ok
bw... bw:03000B0002008070ok
bw... bw:03002B000201D9F6ok
bw... bw:03005B000202A5F9ok
bw... bw:0300730002029BEBok
bw... bw:10008000C2AFC0D0C0E0D2D3758B00E4205A017358ok
bw... bw:1000900085248AC25AC3E52494FA5016C292C291AAok
ect ect ect ect ect..............
bw... bw:0A10A80021F522F523F524020D9036ok
bw... bw:101A000002010804040102030303020101A55A01B3ok
bw... bw:101A400023585037412320202020202020202020F0ok
bw... bw:101A500023424C48454C4923463333302320202031ok
bw... bw:101A60002020202020202020202020202020202076ok
Flash hex file... DONE!
|
but, mine looks like:
Flash hex file... Please wait!
v... øOlliW SilProg v0.05
r... rok
d... dok0A
i... iok
e... eok
Flash hex file... DONE!
no bw...bw stuff