well........got the LED wired up with the in line resistor....after opening up the radio I see there really isn't really alot of choices where to mount it....I think I've decided to mount it under the speaker opening...
so all that's left is to cut the hole and mount it.....and hook up the wires,......
Now all that's needed is where to hook up the + wire to a switched circut...
I've fished around alittle inside the radio but don't know enough about PCB's to locate the switched side of the on/off switch on the board to piggy back....didn't wnat to fry my board by probing too much.....figure maybe someone on here who is smarter than me will donate the info
|