View Single Post
Old 10-23-2007, 09:51 PM   #2 (permalink)
SB
Registered Users
 
Posts: 143
Thread Starter Thread Starter
 
My HF Map location
Join Date: Apr 2007
Default

Step 5: Use your pliers to loosen and remove the brass nut holding the neck strap loop on. (this was only finger tight on mine i used the pliers and my fingers holding the loop on the other side to get it off)

MAKE SURE YOU GET THE LOCK WASHER you don't want that metal thing flopping around in your radio shorting out the electronics.


Step 6: Use your Hex Key (i said 5/64" earlier I'm not 100% positive thats the right size) to remove the 2 silver screws on the lower silver part of the face of the radio. (leave the top two alone they are fake)


Step 7: Remove the 4 screws holding down the LCD board.


Step 8: Carefully roll the LCD board up and remove the 2 Black Screws circled. This is also a good time to grab the 4 buttons from the radio cause when you turn it over next they will all fall out.


Step 9: Next Remove the 4 screws holding the Throttle Stick in place. (i zoomed in in the second pic to help. these are the only 4 screws you have to remove to get the whole gimbal assembly to let go the rest hold the sensors to the assembly)


Attached Thumbnails
Click image for larger version

Name:	dx7 011.JPG
Views:	11747
Size:	59.4 KB
ID:	29172   Click image for larger version

Name:	dx7 012.JPG
Views:	11638
Size:	52.9 KB
ID:	29173   Click image for larger version

Name:	dx7 013.JPG
Views:	11742
Size:	57.8 KB
ID:	29174   Click image for larger version

Name:	dx7 015.JPG
Views:	11830
Size:	64.3 KB
ID:	29175   Click image for larger version

Name:	dx7 017.JPG
Views:	11612
Size:	55.9 KB
ID:	29176  

Click image for larger version

Name:	dx7 018.JPG
Views:	11680
Size:	99.8 KB
ID:	29177   Click image for larger version

Name:	dx7 018-2.jpg
Views:	11559
Size:	59.4 KB
ID:	29178  
__________________
Night Flight - Fly Hard! Fly Fast! Fly Dark!
SB is offline        Reply With Quote