Originally Posted by Hellimod

Hello all,
Well, I finally finished my Brushless Nano CPx mod . Ran into a few problem with the esc set-up but was able to correct the problem thanks to all the help and tips from here. To give a few description of my project here all the parts I used:
1. Nano CPx frame
2. MCPx frame
3. XP3A esc
4. HP03S 15800kv Outrunner (replaced with 1mm shaft from C05 motor)
5. MSRx Landing Skid
6. 8T pinion

The final result was a BL Nano with a fully loaded weight of exactly 29 gram. I tested it this morning and it flew beautifully with much more power. I got 3.5 min of IDLE up flight from stock battery which is good but will also try a 7T pinion to see how it is. Anyway, I've attached some pictures and a digram I made for modifying the Nano frame using part of the MCPx frame. Enjoy.