View Single Post
Old 11-20-2007, 08:25 AM   #16 (permalink)
Registered Users
Posts: 1,411

Join Date: Mar 2007

The other mode you can (should?) enable is mode 9. This puts it into LiPo low voltage (2.7-3.0V/cell) detection rather than the default 0.8V/cell cutoff. This is done with the same steps as 8-12, just waiting for 9 beeps instead of 4.

Of course, you shouldn't be using this to do anything more than protect the pack, and even then, it's arguable that you'd rather ruin the pack than have the motor cut out and wreck the heli...

Personally, I'd rather have it set for LiPo and know what value it cuts out at than the mystery number the other calculation comes out to.
Logo 600 3D V-Bar, Jazz 55-10-32, Tango 45-7, 0.7/13T, BLS451/BLS251, JR R921, Maniac623
Logo 500 3D V-Bar, Jive 100+LV, Scorpion HK-4020-1100, 0.7/15T, S9452/S9256, AR7000, RT560
T-Rex 600 CF, Jazz 80-6-18, Neu 1515/2.5D/F/H, 11T, S9451, ds760/S9254, AR7000, Radix600
T-Rex 500 CF, stock ESC/motor/rotors, 13T, HS-5245MG, ds760/S9254, JR R921
th3tick is offline