HeliFreak - View Single Post - AR7200BX

darkfa8 · 04-13-2013, 06:27 PM

I've had a BeastX and now have the AR7200BX in a Logo 550.

1. At what point during the setup do you verify and/or adjust the swash plate so it is level at 0*? I can't tell whether or not you check it in the Reference Position in Setup Menu G or while your adjusting each swash servo's center adjustment position.

2. On my maiden the model was drifting backwards just slightly. I had to feed in some up elevator to keep it from drifting. Any insight on why this might be happening?

Cyclic servos are MKS HBL665, tail is the HBL669 running 6vdc. Headspeed is around 1700 RPM.

thanks!

04-13-2013, 06:27 PM	#1 (permalink)
darkfa8 Registered Users Join Date: May 2005 Location: USA, NJ	AR7200BX - Swash leveling, and drift Help I've had a BeastX and now have the AR7200BX in a Logo 550. 1. At what point during the setup do you verify and/or adjust the swash plate so it is level at 0*? I can't tell whether or not you check it in the Reference Position in Setup Menu G or while your adjusting each swash servo's center adjustment position. 2. On my maiden the model was drifting backwards just slightly. I had to feed in some up elevator to keep it from drifting. Any insight on why this might be happening? Cyclic servos are MKS HBL665, tail is the HBL669 running 6vdc. Headspeed is around 1700 RPM. thanks! __________________ - Dan G. - Former person of medium importance: Team Lynx Heli Innovations, Hirobo USA Product Specialist, Revolectrix Ambassador, writer at RC Heli Magazine, Fly RC, Model Airplane News, RC Heli Pilot Magazine