View Single Post
Old 08-30-2013, 08:43 PM   #30 (permalink)
carey shurley
Registered Users
Thread Starter Thread Starter
 

Join Date: Apr 2004
Default

yes absolutely

if you are using the coiled tube as a vent, attach it to the molded nipple on the top of the tank

then use the supplied fitting as the return line from the carb primer. Plumb in a "T" fitting with a removeable plug. Fill the tank using this

run the fuel pickup/inlet line directly to the carb with no fittings, filters or anything else just a directl line to the carb pickup.

this setup will work perfectly

the 4 connection approach is needed if you are using a one-way vent valve.
carey shurley is offline        Reply With Quote