View Single Post
Old 09-24-2013, 02:04 PM   #207 (permalink)
TheBum
HF Support
 
Posts: 41,332
 
My HF Map location
Join Date: Jul 2007
Default

Quote:
Originally Posted by trippledigitss View Post
Oh OK , thanks for the clarification. I am powering my PS at 5.5v and I was concerned that extra .5v on the signal to mini v was creating 'gov signal glitches' alerts. But I havent changed or checked the actual signal voltage yet - mainly because I dont know how to check the signal voltage!
For a magnetic sensor, you just need to get the magnet over the sensor and measure between the signal wire and the ground wire, or not have the magnet over the sensor, depending on whether it's a normally high or normally low signal . For a phase sensor, if the signal is normally high with the motor off, you can measure the voltage as with the magnetic sensor. If it's normally low, you'd need to spin up the heli and use an oscilloscope.
__________________
Alan (just call me "Bum"; no need to be so formal)
HeliFreak Support
Protos Max Evo 700 (Brain 2), Protos Max V2 770 (iKON 2), Synergy 516 (Brain 2), Oxy 2 (Falcon 12)
Graupner MZ-32

Experience is something you gain only after you need it.
I wouldn't mind social media so much if it didn't involve people.
TheBum is offline        Reply With Quote