View Single Post
Old 04-14-2014, 02:17 PM   #2 (permalink)
eddiscus
Registered Users
 
Posts: 442
 
My HF Map location
Join Date: Jan 2009
Default

Item 1. Check your front to back balance point with a full payload.

Item 2. Double check the settings in the A2 assistant. I would then just plug a regular servo into F2 or F3 and see if it operates. Do not know what frequency you have to set the servo output to in the gimbal section of the A2 software to have the Z15 accept the signal from F2 and F3 on the A2. I wanted more camera control so I have a second receiver connected to the Z15 GCU.
__________________
__________________________________________________
Citizen 142
MA Whiplash 90E, SAB Goblin 700, Logo Xxtreme 800 and Banshee #25.
REVOLECTRIX Ambassador (save 10% on LiPos anytime at revolectrix.com w/ code EDJOHN18)
eddiscus is offline        Reply With Quote