View Single Post
Old 04-17-2014, 12:55 PM   #2 (permalink)
Subaru4WD
Registered Users
 
Posts: 1,104
 

Join Date: Aug 2012
Default

Use loctite on the motor mounts and the prop nuts.

do not apply positive voltage to ground.

do not apply 12v where 5v goes

do not do any tests or calibrations with the props installed!!! (this goes for updating firmware on your DJI too!)
__________________
Flip FPV Quadcopter Frame - Full APM 2.5 setup - Sunnysky 2216 880kv - 9x5 HQProps - 2650mah 4S
Custom cut 250mm Mini Quad - Flip32 - Sunnysky 2204 2300kv - 6x3 HQProps - 1300mah 3S
433mhz openLRS UHF - 1.3GHz video - Built, not bought!
Subaru4WD is offline        Reply With Quote