View Single Post
Old 04-21-2014, 01:49 PM   #349 (permalink)
CyprusFlyer
Registered Users
 
Posts: 1,201
 
My HF Map location
Join Date: Jan 2012
Default

Well for a start you are risking life and limb
Do not advise getting under a heli at full throttle no matter what!
Have you programmed Throttle Cut to a switch, you must be able to cut the engine in an emergency, the throttle cut should be able to over ride everything. The Governor has a feature where it only engages above 20% throttle and 70% head speed so 0% cut should shut it down.

So flashing every 2 secs is normal, if the sensor is working then when you spin the clutch bell it should flash quickly, if not something is wrong and suggest you work through the problem until it is solved. Also see my post above, may help to check system is working, I assume your magnets are on the clutch bell so should work for you
__________________
LOGO 500SE & 600SE & 600SX
Synergy E7 -
N7 - N5C
zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzTDR + II
Alun
CyprusFlyer is offline        Reply With Quote