View Single Post
Old 08-15-2014, 07:06 PM   #49 (permalink)
ArchmageAU
HF Support
 
Posts: 6,850
Thread Starter Thread Starter
 
My HF Map location
Join Date: Jan 2013
Default

Quote:
Originally Posted by jessecuster View Post
I swear I followed your directions to a T. Yet, my pitch and my throttle are opposite directions of each other, In addtion, my throttle will only go to 71%.


What did I do wrong?
Hard to tell what may be wrong. Calibration on a new model should allow pitch and throttle to go to 100%.

Did you calibrate BEFORE making adjustment to throttle and pitch curves? After altering throttle curve as per instruction, your throttle in normal mode will top out at 72.5% (71% is close enough).

If really in doubt, best approach is usually to start a new model in the TX from scratch (default pitch and throttle curves) and start the calibration process again. (So essentially, literally start again from the top).
__________________
TRex 700E Pro DFC HV (BD3SX) - Gaui X5 (6S/BD3SX), Blade 130X, RealFlight, Heli-X, Taranis+DSMX
ArchmageAU is offline        Reply With Quote