View Single Post
Old 08-27-2014, 04:11 PM   #9 (permalink)
Xsiluro
Registered Users
 
Posts: 641
Thread Starter Thread Starter
 

Join Date: Apr 2009
Default

So the last mechanics part but probably not leased was main rotor parts upgrade and tail blades - more about tail blades later on.

Flasher/Chaos swashplate was so hard moving at the central bearing I have lost any hope for using it. By changing swashplate I changed also main shaft and ball joints.

Articles used:
- Swashplate;
http://www.quickuk.eu/products/5/websho ... xc-05.html
- ball joints;
http://www.quickuk.eu/products/305/webs ... h2031.html
ALIGN main shaft for TREX 600E/N article: H60159T
SpinBlades asimetrical 105mm scale blades




Rotor head dampening was too hard by stock dampers so I have changed the plastic for o-rings, the softer ones even softer than ALIGN gray solution. I bought them localy from company producing them http://www.altes.si/o-ringi.html . On the picture are dimensions 7x3mm are the right ones for Trex600 main rotor head.



So that is information about majority of mechanical upgrades. I do plan to use a scale main rotor head, but regarding that I still need to decide on solution. I will use one or two entire posts just regarding that part,....

Next taste of what I want heli to look like at the end of this build
Attached Thumbnails
Click image for larger version

Name:	Mainshaft_tailblades_ball_ extenders.jpg
Views:	3708
Size:	64.8 KB
ID:	532058   Click image for larger version

Name:	swash_plate_quickUK.jpg
Views:	3680
Size:	61.8 KB
ID:	532059   Click image for larger version

Name:	Main_rotor_damperji_o-ring.jpg
Views:	3690
Size:	71.1 KB
ID:	532060  
__________________
SAB GOBLIN 700, Vbar,YGE 120HV,ALIGN MX750, Gryphon BEC
Scale JET RANGER III 700 size with Flasher 600 mechanics under developement,
Futaba Transmitter T14SG !
Xsiluro is online now        Reply With Quote