here is the lower frame and landing skids.
before you begin, sand the rough edges around the cf frame. mark the mounting holes in the landing gear and drill the holes.(they are 58mm apart). i used the screw caps from QWW to attach the skids, and everywhere it goes through the cf frame. the instructions say to use them on the upper to lower frame mounts, but i chose not to. i also went with the raised tail approach, so assemble the lower half of the lower frame first, with the skids, then attach it to the top portion. i also chose not to use the set screws in the skids. slide the skids through, and you are done.