Thanks for the reply Archimage,
You stated my first Mix task correctly . .
I will digest your Mix formula suggestion and get back to the Forum in a day or two.
Were you able to receive my "Plotting" examples. Hopefully, they did not go to a junk file. . .
Quote:
Originally Posted by ArchmageAU
Got the PM, but will post the answer here as others may benefit from it.
Not being a plane guy, I'll try to understand.
I as assuming you have normal elevator movement when throttle is above 30%. Below 30%, you want a linear add to elevator till throttle hits 0%, with being +10% to elevator.
So the mix, the input is thr and the output is ele.
Next, the throttle needs to be translated to 100/+100 notation. so 30% becomes 40 (x = (n*2)100 = (30*2)100 = 60100 = 40)
Next at 40, the change is 0, at 100, the change is +10. There to extend this out to 140 (40 less 100), the change would be 16.666 (10 * 100 / 60).
So the mix becomes:
thr > ele : high 0 / low 17 / offset 40
Hope this makes sense. Please test and tell me how it goes (as I no longer have a DX8 to test on).
