View Single Post
Old 04-11-2015, 11:09 PM   #18 (permalink)
aerocal
Registered Users
 
Posts: 4,545
 

Join Date: Jun 2008
Default

Interesting. When you look at Monitor Is the throttle responding with a linear curve -100 to +100 ? What you see on the Monitor is what the Rx will be seeing from the Tx.
The one thing to learn and you might practice now while your getting started is when theres some kind of issue like this and you want to see if the issue may be in a setting somewhere its very helpful if you can attach the .SPM (model) file to your post. I can load it and look to see if it might be a programming issue.
Im not real familiar with the 180cfx. I havent heard of this though.AFAIK most if not all of the Blade ESCs do not require the Tx thr range to be setup.
If your Thr output is in fact linear it may well be an ESC issue.
__________________
Too many helis & Too many planks
Lots of DX radios & A couple Futaba 72mhz radios
AMA member & Full scale plank driver
HELIFREAK !!!
aerocal is offline        Reply With Quote