View Single Post
Old 04-21-2015, 02:09 PM   #10 (permalink)
Grimmy
Registered Users
Thread Starter Thread Starter
 

Join Date: May 2012
Default

Time to start attaching wires.



Here I got all the wires attached. I chose to move then around as things were getting pretty tight from one pin to another.



After getting one channels wires on, I needed to get some hold for the power plugs before the other wires were in.



Here's a test fit of both channels power plugs that are actually mounted on the holder and help hold the board in place.



Here's what the board holder looks like and the cut outs I made for the wires to pass through. This is just a prototype to see how things would work so I had to improvise on the spot here and there.

Attached Thumbnails
Click image for larger version

Name:	20150407_170152.jpg
Views:	2390
Size:	74.8 KB
ID:	581483   Click image for larger version

Name:	20150409_105725.jpg
Views:	2386
Size:	74.3 KB
ID:	581484   Click image for larger version

Name:	20150410_152953.jpg
Views:	2249
Size:	83.5 KB
ID:	581485   Click image for larger version

Name:	20150411_170042.jpg
Views:	2387
Size:	94.5 KB
ID:	581487   Click image for larger version

Name:	20150411_192601.jpg
Views:	2367
Size:	104.2 KB
ID:	581491  


Last edited by Grimmy; 04-21-2015 at 09:20 PM..
Grimmy is offline        Reply With Quote