View Single Post
Old 05-07-2015, 12:03 PM   #64 (permalink)
Grimmy
Registered Users
Thread Starter Thread Starter
 

Join Date: May 2012
Default

So was able to get some more done last night, in the little time that I had. I made the slots for the wires and cables to pass thought to go to the Duo's. Here's the first slot, nice and clean.



Milling the second slot.



Third and 4th slot done.



I mounted up the balance board, and just hand drilled those holes in, ran the wires to see how they fit and just set the chargers in place. Looking good so far.



On a good note, I did find that I had another piece of acrylic that matches the top piece, so I can make the removable lid. Also I was surprised the 2 pieces glued together stiffened things up pretty well where I won't have to add as much support as I thought I would have had to. Next I want to put the deck in the case and check my height as last I was checking I think I was going to have to lower the deck a little to clear the Duo's on the case lid. Doing that will require having to shave a little around the edges, which isn't easy. Several quick passes on the belt sander or with a hand file seem to work best but it's a very slow process. Hope to get that done tonight if I get a chance to work on it again.
Attached Thumbnails
Click image for larger version

Name:	20150506_200120.jpg
Views:	756
Size:	88.2 KB
ID:	584469   Click image for larger version

Name:	20150506_200414.jpg
Views:	746
Size:	70.7 KB
ID:	584470   Click image for larger version

Name:	20150506_201556.jpg
Views:	795
Size:	86.2 KB
ID:	584471   Click image for larger version

Name:	20150506_203921.jpg
Views:	774
Size:	96.3 KB
ID:	584472  
Grimmy is offline        Reply With Quote