View Single Post
Old 11-08-2015, 01:33 PM   #8 (permalink)
Registered Users
Thread Starter Thread Starter

Join Date: Nov 2013
Location: Aberdeen, UK


No, using offset doesn't work, i tried it. The problem with offset is it's a fixed value that simply moves the centre point by a fixed %. To make this work you have to have the mix proportional to the gyro input, but opposite.

But yes, i did it by mixing the gyro channel ('gear') to gyro. So in the mixing menu that's GER>GYR. This is the same for both mixes. The mix is activated by the same switch I use for rescue. Rescue itself is done using bank switching in the spirit from Aux2 channel.

Here's a photo of the mix I used, this has to be duplicated on on Mix 2 also:
Attached Thumbnails
Click image for larger version

Name:	DSCN1929.jpg
Views:	60
Size:	149.0 KB
ID:	618372  
Gob 700 Speed | Gob 770 Comp | Gob 700 BT 'S' | Gob 700 BT 'T' |Trex 700X | KDS Agile 7.2 | Trex 600Pro (626 stretch) | Kasama Dune 600 | KDS Chase 360 | Devil 420 | XLPower 700 and 520
Grumpy_Old_Man is offline        Reply With Quote