View Single Post
Old 05-13-2008, 09:41 PM   #24 (permalink)
rotorhead58d
Thread Starter Thread Starter
 

Join Date: Jan 2008
Default

Quote:
Originally Posted by Skeysl View Post
Hi,
nice build. I'm not Fly pilot but I'm flying EP10 v1 for more than a year and half now. It seems that head is still the same on the Fly. I had some difficulties to setup it right to get +/- 10 degrees of pitch with decent cyclic and no binding.

My solution was to flip the pitch compensator upside down, flip flybar cage and use a few washers. After that my linkages are straight and binding is gone. There's a picture:
http://tomas.skacel.googlepages.com/..._3698-full.JPG

There's my canopy:
http://tomas.skacel.googlepages.com/..._3693-full.JPG
It's from Eco 8 but it's not original one. Unfortunately, I don't know if it fits your Fly.

Also, Thunder Tiger ball links are much better that stock ones IMHO.

I hope it helps. Enjoy your Fly!
i'll take a look at the head mod. thanks for the info.
rotorhead58d is offline        Reply With Quote