View Single Post
Old 04-15-2016, 07:02 PM   #47 (permalink)
everydayflyer
Registered Users
 

Join Date: May 2009
Default

So as I understand it the AR636 has the following modes which are activated with the following values.

1)Panic Recovery value 150

2)Stability Mode value 100

3) Agility Mode value 0 , also referred to as Intermediate

4)Agility Mode value -100 , also referred to as 3D

IMO page 9 of 230 manual does a very good job of explaining Panic Recovery and also Stability Mode.

Intermediate and Agility Modes ,both Modes share same definition ,bank angle is not limited and when cyclic sticks are released model will not return to level. Plain enough but what is the difference provided by the 0 versus the -100 input value.

What effect do values between 100 and 0 or 0 and -100 have if any?

Charles
__________________
mS/R --3ea. mCPX 2 converted to BL 4ea. mCPX BL 2ea. BL-130X
400 FBL ,.Blade 450X ikon Blade 450X with Ar7200BX
Blade 300X MIcroheli CF frame many upgrades 230S , LOGO 690 Brain / HD , Trex 450 Pro with Brain ,planks...

Last edited by everydayflyer; 04-16-2016 at 05:37 PM..
everydayflyer is offline        Reply With Quote