Quote:
Originally Posted by IFlyRC80
Just opened up my new 230S and followed the instructions. When it initializes the cyclic goes all the way right aileron and full down elevator.
When I spool it up just enough to lift off it tries to go right and forward.
Any advice?
|
Yes sir,
That is normal when the heli is in stability mode.
When I first got my 230s I was not confident in trying to lift the heli off because it kept wanting to do this.
However if you just pull it back left some until you get off the ground it will then fly very nicely. The gyro is trying to correct the torque of the blades when the blades arent spinning so it thinks it needs to go that way to be level. Just fly the disc on the ground and get into the air quickly and it will work fine.
If you still don't have the balls to do it, just fly in intermediate (iu1/fm1) then flip it back over to stability once you are off the ground.